Type: Driver
File Name:
File Size: 22.6 MB
52 (3.58)
Downloads: 29
Supported systems: Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit
Price: Free* (*Free Registration Required)

Download Now

Duplex unit for Is the Duplex unit for that other model toshiba 477s specific model installed? Is the 2nd tray for that specific 2nd tray for other model is model installed?

Is the 3rd tray for that specific 3rd tray for other model is model installed? Have you checked defective contact of contactor points? Re-connect them normally. Yes Check for defective contact of the toshiba 477s voltage system. No Replace the high voltage power supply.

Is the fan bottom right of the front of the low voltage power supply block working? Environment humidity is abnormal. Environment temperature is abnormal. Does toshiba 477s error recur? This error can easily occur when a printer is brought in to indoor from outdoor. Leave the printer for 2 hours or half day under room temperature, and turn on the power again. Fuser exhaust Is the fan connector connected fan error normally?

Toshiba 6lk20902000, Fuser Tr Unit, E-Studio 477s, 527s- Original

toshiba 477s Remedial measure Check for sure connection of the toshiba 477s connector. No Replace the fan motor. Yes No. Turn off the Power of the printer and back on. Yes Replace the Board 8TH. After leaving a printer under room temperature, turn on the power again. Re-connect it normally. Yes Replace the fan motor.

No Replace the PU board. Does the error recur when the power is turned off once and back on?


Remedial measure Check if the Duplex unit is installed normally or toshiba 477s. Check if the fans Yes are installed normally or not. Is the LED head connected normally?

Install the LED head unit normally. Yes After toshiba 477s fuse No Turn on the power again. Yes For the method of checking the LED head unit fuse, refer to section 7. After cleaning the connecting connector of the fuser unit, re-install the fuser unit. Toshiba 477s on the power again.

Toshiba E-studio 477s Specifications

Install the toner cartridge. No Rotate the lock lever of toner to the lock position. Yes Replace the toner sensor assembly. Toner sensor detection toshiba 477s. Turn on the power Compensation Is the error message displayed? Thermistor Error Yes After leaving a printer for 30 minutes, turn on the power again. Short-circuit or opencircuit toshiba 477s fuser Does this error recur?

The fuser thermistor has detected an abnormal temperature high temperature or low temperature. Yes Replace the fuser unit.


Yes Replace the low voltage power supply unit. Yes Replace the high Does this error recur?

Error Codes > Toshiba > e-Studio S > page 1

Yes After leaving a printer for 30 minutes, turn on the power again. The backup roller Does this error recur? At high temperature.Toshiba's e-STUDIOs/s A4 monochrome MFPs have all the advantages of a full size MFP and the convenience of a small size printer packed in one. Buy toshiba 477s Toshiba E-Studio S Multifunction Copier from Copyfaxes at an unbeatable price. Call now and order your Toshiba EStudio S MFP Copier today.

Relevant Posts

Leave a Reply

Your email address will not be published. Required fields are marked *