NEW DRIVERS: COLORQUBE 9301 PS

COLORQUBE 9301 PS DRIVER DETAILS:

Type: Driver
File Name: colorqube_9301_29858.zip
File Size: 38.7 MB
Rating:
3.92
6 (3.92)
Downloads: 4
Supported systems: Windows 2008, Windows XP, Windows Vista, Windows 7/8/10
Price: Free* (*Free Registration Required)

Download Now
COLORQUBE 9301 PS DRIVER



Now we need to specify what driver to use for colorqube 9301 ps newly created printer. Go to 01E and follow the procedure for the power distribution PWB. Y N Refer to WD 1. Y N Install a new power supply unit, PL 1. Disconnect PJDC3 from the power supply unit and check for a short circuit between pin 16 of the disconnected PJ and the chassis. Switch off the machine, then switch on the machine, GP Figure 1 Component location Refer to Colorqube 9301 ps 1.

COLORQUBE 9301 PS TREIBER WINDOWS 8

Disconnect PJDC1 from the power supply unit and check for a short circuit between pin 10 colorqube 9301 ps the disconnected PJ and the chassis. Disconnect PJDC3 from the power supply unit and check for a short circuit between pin 12 of the disconnected PJ and the chassis.

With PJDC3 still disconnected from the power supply unit, check for a short circuit between colorqube 9301 ps 13 and 14 of the disconnected PJ and the chassis. Disconnect PJDC1 from the power supply unit and check for a short circuit between pin 18 of the disconnected PJ and the chassis.

NEW DRIVER: COLORQUBE 9301 PS

Ensure that the electricity to the machine is switched off while performing tasks that colorqube 9301 ps Go to 01K and follow the procedure for the Quad wave amp PWB. The fault is still active. Y N Switch off the machine, then switch on the machine, GP Go to WD 9.

Check the wiring between the interlock switch and Colorqube 9301 ps and repair the wiring as necessary, refer to REP 1. If necessary, install new components: Front door interlock switch, SPL 1. If necessary, install a new power supply unit, PL 1. Pin 24 is short circuit to ground.

COLORQUBE 9301 PS DRIVER PC

Repair the wiring, REP 1. Y N Ensure that the electricity to the machine is switched off while performing tasks that do colorqube 9301 ps need electricity. Other voltage supplies are inter-dependent. The LEDs illuminate. Either the power supply unit is faulty or there is a short circuit.

Refer to WD 9. Colorqube 9301 ps should be correctly and securely connected at each end, and should be undamaged. This cable carries power control signals from and to the power supply unit. The cable is good. Y N Correct the cable connection or install a new drum driver power supply inter- face cable, PL 1. Pin 27 is short circuit to ground.

Ps 9302 manual

Colorqube 9301 ps 1 Component location This can be measured on the top of the connector, while it is connected to the drum driver PWB. The yellow LED on the power supply unit should also be lit, Figure 1. Y N Correct the cable connection or install a new drum driver power supply interface cable, PL 1. Switch off the machine GP Pin 26 is shorted to ground. Initial Actions Y N If possible, repair all the current listed faults, before performing this procedure, refer to dC Procedure Repair the wiring, REP 1. It should be correctly and securely connected at each end, and should be undamaged, PL 1.

Xerox ColorQube Family Service Manual Voltage Electrostatic Discharge

The ribbon cable is secure and in good condition. Switch on the machine Colorqube 9301 ps The fault code is still present. Check the 3 LEDs on the power supply are illuminated, Figure 1. The 3 LEDs are on and remain illuminated after 60 seconds.

ColorQube // Drivers & Downloads

Go to WD 1. Check the drum driver power supply interface cable for short circuits on PJ at pin 28 and pin If necessary, install a new drum driver power supply interface cable, PL 1. Xerox EX-i CC Xerox Fallback Colorqube 9301 ps Color V4. Windows Generic PPD.

Web-based Scan Colorqube 9301 ps Installer.Product downloads for ColorQube // PS Driver bit - Xerox User Interface - Microsoft Certified. PostScript; V3 Driver; WHQL. Description. File downloads for ColorQube // File Download: ColorQube 93xx w/ConnectKey SPAR System Software Version

Relevant Posts

Leave a Reply

Your email address will not be published. Required fields are marked *